cellity freeSMS v. 1.3.2

Introduction:

Send text messages from your mobile worldwide free of charge.

cellity – already known for its free mobile twitter client – offers a free text messaging service: cellity freeSMS, which is available now! Sending and receiving short messages results in no fees through cellity. Your provider will not charge for any costly texts/SMS anymore when you use our freeSMS tool -only the cost of data traffic (via GPRS) if any. And the best part: It works all over the world, with any cellphone contract. No new phone number, no new SIM card, no new contract required

Messages Length:

When writing a text message with cellity freeSMS you can send up to 2,048 characters! So your short message is no longer awkwardly split after 160 characters into several messages. Simply let your imagination run free while writing a text message.

Keep track of every conversation! Each text message/SMS is automatically added to the preceeding message of the same receiver. That way you always have a complete list of the communication history with your friends.

How to use:

Download the messenger software from here or visit:

www.cellity.com

After the download your phone will ask you to instal the application, please follow the on-screen instructions. Once the applications is installed you can start it.

Please verify your identity typing in your phone number inlcuding the international prefix (i.e. +44XXXYYYZZZZ)

You will then receive a traditional SMS stating your password. Please read this SMS and remember the 4-digit-PIN-code. Restart the cellity freeSMS application and when asked to do so input the PIN-code. You are all set now.

Software Information:

Product Name: cellity freeSMS v. 1.3.2

License: Freeware Software

Date Added: May 21, 2007

Date Update: May 28, 2008

User Rating: 8.07 (690 votes)

Total Downloads: 2,017,733 (32,815 last week)

cellity tweeter 1.1.9

Introduction:

cellity tweeter: The most comprehensive mobile Twitter client free micro blogging made easy – directly from your mobile phone brought to you by cellity – also known for its freeSMS client.

“Twitter is for staying in touch and keeping up with friends no matter where you are or what you’re doing. For some friends you might want instant mobile updates—for others, you can just check the web. Invite your friends to Twitter and decide how connected you want you to be.” More info here

What does this mobile client do for you:

With the cellity tweeter client you can use all of the following Twitter features directly from your mobile phone:

• my timeline: show last 20 messages in my timeline
• public timeline: show 20 current public messages from random users
• timeline of a friend: show timeline of a selected friend (20)
• list of friends: show list of “friends”
• list of followers: show list of “followers”
• featured list: show list of featured users
• my messages: show received direct messages
• send direct message: send private message to a friend
• sms tell a friend: send SMS with download link to new user
• mail tell a friend: send email with download link to new user

How does it do that:

• If you have not done so far, you will need to register an account with Twitter
• The cellity tweeter connects to our dedicated tweeter server which then directly connects to Twitter. This way we avoid you paying for expensive SMS per message. It is just a little bit of data traffic through GPRS.
• The software is free, of course. Also, we do not charge any money for the data traffic incurred when connection to twitter. However, you mobile network operator might charge you a little bit for the data traffic – please check their rates before using this messenger to be informed.

Technical information:

• works on any Java MIDP1 and MIDP2 enabled phone, which means it also works on most of the Symbian and Windows Mobile phones (as many of them support Java)

Platforms: Java (J2ME)
Version: 1.1.9
Date: 2007 Apr 24
Updated: 2007 Sep 4

eBuddy Mobile Messenger 0.91.0

Introduction:

The eBuddy Mobile Messenger is a multi-net application that you can use intuitively for the main thing that you want such an application for: Chat with your buddies.

How to Use:

Download it to your phone to get the best chat experience on MSN, Yahoo! and AIM, all in one single buddylist. It remembers your username and password for quick login, supports sound notification of a new message, reacts fast and has many more advantages:

• Fast response
• Minimal data usage
• Low Battery usage
• Easy to use
• Sound & Vibration
• Group-chat

Platforms: Java (J2ME)
Version: 0.91.0
Date: 2007 Jun 14
Updated: 2007 Aug 13

In Callert 2.0 – custome mimnute beeps (FREEWARE)

Introduction:

While active, this program makes a beep sound* at the minute mark and can also make a different beep sound before the minute mark of your call. This feature helps notify you that a new minute cycle is coming soon, useful to control your call lengths by not getting into a new minute and using just a few soconds of the whole new minute that you’re charged for – especially for international or other costly calls where the cost per minute is quite high. In cases like this, you would like to set Incallert to warn at and before every minute.

It can also be useful in the case that you don’t want to waste too much time on the phone – you can set Incallert to warn you every 5 or 10 minutes.

Requirements:

Incallert can be used on S60 2nd Edition phones only.

NOTE:

When an alert is issued, you would hear sound beeps ONLY IF THE PHONE’S CURRENT PROFILE’S “Warning tones” is set to “On”, this setting is in your Series 60 phone’s “Profile”-> Personalize. You can also change the current profile anytime by pressing the “Power” button briefly. However, the backlight would light up upon alerts regardless of the phone’s current profile – this is useful for people who want alerts as backlight only, instead of both backlight and beep sound.

How to use:

Incallert works automatically after install – it would make beep sound alerts in calls right after install. It also auto-starts with the phone: use the Auto-Start option in the settings page to disable/enable this.

In the main tab, press the “Done” softkey to switch Incallert to the backgroud – Incallert would work from the background. On your Series 60 phone, you can press-and-hold the “Applications Button” to see a list of all open applications that are in the background, scroll down to see if Incallert is monitoring in the background.

To stop/deactivate Incallert and exit completely, please select the “Options” softkey and then select “Stop & Exit”.

Press the joystick right to go to the settings page.

Settings:

“Auto-Start” refers to auto-start of incallert when phone is powered on.
“Minute Alert Cycle” refers to the time in minutes between each minute beep while in-call.
“Start at” sets which minute should the alert cycles start working.
“Warn Before Cycle” function issues a warning beep – you would hear the “warning beep” before each new “Minute Alert Cycle”.This feature helps notify you that a new minute cycle is coming soon, useful to control your call lengths by not getting into a new minute. If you want it to warn before every new minute, you should set the “Minute Alert Cycle” in the Settings to “Every Minute”.

Download: http://w16.easy-share.com/1700670369.html

IRC chat by using J2ME supported handset

Introduction:

If you want to chat in IRC with your cell phone, it is possible now. jmIrc is one of the popular client software based on cell phone. This software works in J2ME supported cell phone. If your cell phone supports J2ME, you can easily use this software in your cell phone to do IRC chat.

Download:

• http://jmIrc.sf.net/jmIrc.jad
• http://jmIrc.sf.net/jmIrc.jar

After install it in your cell phone, please set the default internet connection INTERNET. If your default connection is WAP, it may not work.

This software supports mIRC colors, AOP commands, Ignore, Notify, limited screen log.

Features:

• Should run on any J2ME device
• Tries to be small and easy to use (v0.95 is 34 kB, Virca is 33 kB and WLIrc 1.0 is 49 kB)
• Supports multiple windows and scrolling is easy with pgup/pgdown and home/end buttons.
• Supports Russian codepages KOI8-R and Windows-1251 natively
• Supports UTF-8 autodetect, native encoding/decoding and fallback charset if decoding fails
• Supports connecting through an HTTP proxy and provides a standalone easy-to-set-up proxy
• You can add favourites for most used phrases and send them with few button presses
• Full and working support for mIRC colours (WLIrc has also full but not always so working support)
• All files are free software and thus GPL’d including the proxy code